Wofür eignet sich der Double Falz Seamer mit Erweiterungsset besonders gut?

Er ist für Einzel- und Doppelstehfalz geeignet und schafft das Zufalzen in nur einem Arbeitsgang. Das spart Zeit und macht ihn besonders praktisch für größere Dachflächen.

Was bringt das Erweiterungsset mit den 3 Support-Rollen im Alltag?

Die 3 Support-Rollen sorgen für mehr Stabilität beim Arbeiten. Das hilft, den Falzschließer sicherer zu führen und sauberere Ergebnisse auf dem Dach zu erzielen.

Ist das Gerät für den mobilen Einsatz auf der Baustelle geeignet?

Ja, das Gerät ist kabellos und leicht sowie mobil ausgelegt. Das macht es passend für den Baustelleneinsatz, besonders wenn flexibel gearbeitet werden soll.

Welche Art von Antrieb hat der Falzschließer?

Er wird über einen Akkuschrauber angetrieben. Das bietet flexible Nutzung ohne festes Kabel und erleichtert das Arbeiten an unterschiedlichen Stellen auf dem Dach.

Ist dieses Modell eher für kleine oder große Dachflächen gedacht?

Es ist speziell für große Dachflächen beschrieben. Durch das schnelle Zufalzen kann man dort deutlich effizienter arbeiten als bei kleineren, weniger anspruchsvollen Einsätzen.

INCL. CABLE PULL REMOTE CONTROL

Buschmann Tools Double Falz Seamer Transportkoffer

Buschmann Tools Double Falz Seamer Falzmaschine für Einzel- | Doppelstehfalz

Buschmann TOOLS Falzschließer Erweiterungsset Anwendung in Werkstatt

Ersatzrollen Set für Buschmann Double Falz Seamer, bestehend aus 3 harten und 1 weichen Rolle, optimiert für Montage.

Buschmann Tools Double Falz Seamer Erweiterungsset mit Koffer

Buschmann Tools Double Falz Seamer Extension Set

Buschmann Tools Double Falz Seamer Rollen Werkstatt mit Koffer

Buschmann Double Falzschließer Werkzeug eingesetzt in Werkstattumgebung für Dachdecker

Buschmann Tools Double Falz Seamer Falzmaschine für Einzel- | Doppelstehfalz Hand

Ersatzrollen Set für Buschmann Double Falz Seamer – Detailansicht des Werkzeugs mit Rollen.

Buschmann Tools Double Falz Seamer Falzmaschine für Einzel- | Doppelstehfalz Detailansicht

Buschmann Tools Double Falz Seamer Anwendung Akkuschrauber Werkstatt

Buschmann Tools Double Falz Seamer Rollen

Buschmann Tools Double Falz Seamer mit Akkuschrauber und Extention Kit

BUSCHMANN TOOLS - Double Seam Seamer + Extension Set | Extension Kit

▶

Buschmann Tools Double Falz Seamer Anwendung

▶

Buschmann Tools Double Falz Seamer Falzmaschine für Einzel- | Doppelstehfalz Anwendung

▶

Buschmann Tools Double Falz Seamer Image Video

▶

Buschmann Tools Double Falz Seamer Anwendung Dach

▶

🏢

Commercial Customers & B2B Service
Automatic B2B invoice with VAT shown & tax-free VAT ID export.

🚚 Lieferzeit: ≈ 1–3 Werktage nach Germany

🛡️ 30-day returns: Hassle-free returns & 100% money-back guarantee

💼 B2B Service: Tax-free EU delivery with VAT ID

Buschmann

BUSCHMANN TOOLS - Double Seam Seamer + Extension Set | Extension Kit

SKU: 0601

⚡ Full control while standing: the Bowden cable remote control operates the cordless screwdriver’s throttle directly from the handle.

Ready to ship immediately

🚚

Shipping Mon–Fri: Orders placed by 3:00 p.m. ship the same day. Sat & Sun not guaranteed, but we do our best.

€1.769,99 excl. VAT

€1.779,98

incl. 19% VAT €2.106,29 (Germany)

✓ Remote control via Bowden cable - adjust the cordless screwdriver's trigger continuously right from the handle while standing
✓ Pure ergonomics - no more bending or kneeling to switch on the machine when working on long roofing sheets
✓ Incl. 3 support rollers - guide system prevents tipping and ensures constant contact pressure

PROFESSIONAL SET WITH CABLE-PULL REMOTE CONTROL

Accelerate right at the handle. Stand-up seaming at up to 30 m/min.

The BUSCHMANN TOOLS Double Seam Seamer set with the Extension Kit. The highlight: use the cable remote to conveniently control your cordless screwdriver’s trigger from the standing position at the guide handle - combined with 3 support rollers for precise tracking along the seam tape.

Your savings calculator for large surfaces

Standing seam area per week: 100 Meter

⏱️ - Time saved / week

                  💰
                  -
                  Labor costs saved / week
                

🚀 - Pays for itself after

CABLE PULL REMOTE CONTROL

Infinitely variable throttle control on the handle.

The key component of the Extension Kit: The remote control is secured directly to the switch on your cordless drill with a special clamp. The precision Bowden cable lets you continuously adjust the machine’s speed using the lever on the ergonomic handle - comfortably as you walk, without ever having to bend down to reach the drill.

EFFORTLESS WORKING

Full ergonomics for large surfaces.

The automated drive takes all physical strain off the wrists. Easy on the back and ideal for all-day use on large construction sites.

Get to cable pull control in 3 steps

Operating the machine while standing is that easy:

1. Secure cable puller clamp

Attach the remote control clamp to the cordless screwdriver switch and install the guide handle.

2. Position at the seam

Set up the machine. The 3 support rollers automatically align the device securely on the track.

3. Accelerate at the handle

Walk upright and precisely control the machine speed using the hand lever and Bowden cable.

Suitable Materials & Sheet Metal Thicknesses

Maximum flexibility for your everyday metalwork on the roof:

⚡

Zinc / titanium zinc

bis 0.8 mm

✓ High-speed

🎨

Painted sheet metal / aluminum

bis 0.8 mm

✓ Scratch-free

🧱

Copper

bis 0.8 mm

✓ High-speed

🛡️

Stainless steel / Uginox

bis 0.5 mm

✓ Smooth operation

Built for the demands of a sheet metal worker’s day-to-day work

Precision guide rollers & wear-resistant drive system:

🔨

Suitable for continuous use

High-performance mechanics withstand hundreds of meters of continuous operation without overheating.

🌧️

Dust- and weatherproof

Sealed bearings prevent metal shavings and water from getting in.

🛡️

0 complaints

Even pressure prevents rippling and paint chips.

🎮

Cable pull remote control

The switch clamp and Bowden cable transfer your hand movement directly to the cordless screwdriver’s switch.

🧍

100% Upright posture

Adjust the machine’s speed conveniently while walking - noticeably reducing strain on your back, knees, and wrists.

🛞

3 support roles

Prevent tipping at the seam and maintain constant pressure.

The difference is in the details.

With cable remote control vs. manual machine operation:

Eigenschaft	Double-seam seamer + cable pull kit	Standard machine (without kit)
Switch operation	By hand lever and Bowden cable on the handle	Direct pressing on the cordless drill
Work posture	Fully upright while walking	Bent over / Kneeling on the roof
Speed control	Continuously adjustable at the guide handle	Only possible directly at the machine
Tipping protection	3 support roles included	Standard guide rollers

This is included in the package.

Ready to use on the job site:

✓ Double Standing Seam Seamer Set – Incl. Extension Kit & Cable Remote Control
✓ Sturdy construction-site transport case
✓ Instruction manual & data sheet

Experiences from the trades

What sheet metal workers and roofers say about our tools:

★★★★★

“Highly recommended”

Emre

Master roofer

★★★★★

“Everything was great. Gladly again.”

Marco

Sheet metal work

Detailed product information

✔ Seaming in just one pass – maximum efficiency on the job site
✔ Suitable for single and double standing seams
✔ Extremely fast: up to 30 m/min
✔ Material-friendly seaming rollers (60 mm) – no deformation or damage
✔ Compatible with cordless drills – flexible and mobile use
✔ Large roof areas - saves a lot of time

Fastest Seaming for Standing Seam Roofs

The Double Falz Seamer by Buschmann Tools is a powerful seaming machine for roofers and sheet metal workers that closes single and double standing seam profiles in just one pass. This makes it one of the most efficient solutions for modern standing seam systems, and a must-have roofing tool and sheet metalworking tool.

With a speed of up to 30 m/min, you save valuable time and can work on even large areas much faster.

Precise Results Without Stressing the Material

The large 60 mm seaming rollers ensure an especially even, flat seaming process. This protects the material and prevents stretching or damage - a key advantage when working with high-quality materials such as:

• Copper
• Aluminum
• Titanium zinc
• Stainless steel

Versatile Use - Even in Difficult Areas

The Double Falz Seamer can be positioned anywhere along the seam, offering maximum flexibility on the job site. The open housing also provides an optimal view of the work area, so you stay in control at all times.

Another advantage of the Double Falz Seamer:

For seam heights of 25 mm or more, no additional height adjustment is required - saving time and making operation easier.

Ergonomic & Compatible

Weighing just approx. 5.3 kg, the machine is comfortable to handle. It is used with a standard cordless screwdriver, allowing you to work independently and on the move.

Typical Applications

• Standing seam roofs (single and double standing seam)
• Metal facades
• Sheet metalwork
• Roof renovations
• New construction projects

Technical Highlights

Speed: up to 30 m/min
Weight: approx. 5.3 kg
Seam system: single and double standing seam
Rollers: 60 mm diameter (gentle on materials)
Drive: compatible with cordless screwdriver

Transport: includes carrying case

Why the Double Falz Seamer Is Essential

Its greatest advantage is the combination of exceptional speed, precision, and gentle handling of materials. The tool is perfect for larger roof areas and lets you complete even kilometers of seaming work in a fraction of the time - with consistently perfect, even results.

A true high-end tool for roofing supplies and sheet metalworking supplies, that no professional job site should be without.

Supplied in a rugged carrying case with protective foam - ready to use on the job site.

Discover it now at the roofing shop at Roofify - for maximum efficiency when working with standing seams.

Which products are right for your project?

Compare the options for maximum efficiency on the construction site:

Recommendation

2-in-1 standing seam closer

Classic & Flexible | For long seams

Wider folding jaws for fast work on the roof
Strong leverage for effortless work
2-in-1 Fold Down & Close

€219,99

View details

Extremely Fast

BUSCHMANN TOOLS - Double Falz Seamer | Seaming machine for single and double standing seams

Double-seam seamer

Energy-saving & extremely fast

Maximum speed on standing seam roofs
Operation with a standard cordless screwdriver
Perfect for long roof surfaces

€1.649,99

View details

BUSCHMANN TOOLS - Set of 2: 2-in-1 Angle Seam Closer Set & Mini Angle Seam Closer

Standing seam closer set 2-in-1 & Mini

The Complete Package

Includes standard and mini angle seam closers
Perfectly equipped for both large surfaces AND details
Direct savings compared to buying individually

€374,99

View details

High quality

for the highest precision

Excessive durability

can last a lifetime

1-year manufacturer’s warranty

(which nobody uses anyway)

Your cart
Product	Product subtotal	Quantity	Price	Product subtotal
BUSCHMANN TOOLS - Double Seam Seamer + Extension Set \| Extension Kit0601	BUSCHMANN TOOLS - Double Seam Seamer + Extension Set \| Extension Kit0601 Regular price ~~€1.779,98~~ Sale price €1.769,99/piece	€0,00	Quantity	Regular price ~~€1.779,98~~ Sale price €1.769,99/piece	€0,00

Item has been added to the cart.

BUSCHMANN TOOLS - Double Seam Seamer + Extension Set | Extension Kit

Accelerate right at the handle. Stand-up seaming at up to 30 m/min.

Your savings calculator for large surfaces