ABS - Anchor Loop | Mobile Anchor Point

✔ Temporary, mobile anchor point for personal protective equipment against falls from height (PPE)
✔ Tool-free assembly: Simply place the webbing loop around your head, pull it through, and you're done.
✔ Can be used flexibly on beams, masts, wooden beams & load-bearing components
✔ Approved for up to 3 people – ideal for team deployments
✔ Certified according to DIN EN 795:2012 or ETA – suitable for standard to documentation projects

ABS - Anchor Loop | Mobile anchor point (DIN EN 795 & ETA)

The ABS Anchor Loop is your practical, temporary anchor point for maximum safety when working at height. Whether on the roof, the facade, or during assembly work: with the robust webbing sling and the integrated D-ring, you can create a secure anchor point for your personal protective equipment in no time. The Anchor Loop is a modern solution, especially for roofers and plumbers , when you need to remain flexible – without compromising on safety or compliance with standards.

Which option suits your needs?

DIN EN 795:2012

Perfect for classic craft tasks such as maintenance, repair, and assembly. Ideal if you want to secure things quickly and need a practical, standardized solution for everyday construction site work.

ETA (European Technical Assessment)

Recommended for projects with increased requirements for documentation and planning – e.g., public construction projects or larger construction sites where a Europe-wide recognized assessment is required.

Usage: How to use the ABS Anchor Loop correctly

You place the webbing loop around a load-bearing structural element (e.g., steel beam, mast, wooden beam). Then, you thread the webbing through the opposite eyelet and tighten it securely until it fits snugly. The integrated D-ring serves as a defined anchor point for lanyards, shock absorbers, or fall arrest devices. Important: Only use the Anchor Loop on suitable, tested structures and observe the requirements of your risk assessment – ​​this way, workplace safety becomes routine.

Common product characteristics

• Material: Stainless steel
• Design: Stop loop Ø 5 mm
• Installation: Screw into wooden rafters
• Minimum rafter dimensions: 60 × 120 mm
• Number of people: max. 3
• Appearance: discreet, can be stored under bricks
• Identification: consecutive serial number
• Application: Maintenance, service & safety on pitched roofs
• Optional: Mounting through rafter insulation is possible.

Areas of application: Roofing, facade and assembly work with simple tools .

Overview of variants

L-LOOP – Standard (with insulation thickness specification)

Mounting hardware: 2 × screws 6 × 180 mm

Installation is also possible through rafter insulation up to a maximum of 200 mm (specify insulation thickness).
👉 Ideal for insulated roof structures with defined insulation thickness

L-LOOP-80 – Standard

Mounting hardware: 2 × screws 6 × 180 mm

Fastening is also possible through rafter insulation.
👉 Universal solution for typical rafter mounting

L-LOOP-ETA – with ETA approval

With European Technical Approval (ETA)

Mounting hardware:

2 × screws 8 × 160 mm

4 × screws 6 × 180 mm
👉 For projects with increased verification or approval requirements

Your advantage in the roofing shop

If you're looking for a fast, flexible fall protection solution, the ABS Anchor Loop is a real must-have in any roofing supply store . You can get it from your roofing specialist , Roofify – for professional roofing supplies, sheet metal work equipment, and reliable personal protective equipment.